EKOPRODUR S0540 is a polyurethane system consisting of: polyol part (component A) and isocyanate part (component B). Each of the ingredients is a liquid and has different parameters. Component A with a higher viscosity is dark, while component B with higher density is brown. In addition, the system is distinguished by a reduced emission of volatile organic compounds (VOC), as it does not contain foaming agents that significantly deplete the ozone layer - according to European Union regulations, Regulation (EC) No. 1005/2009 of 16.IX.2009.
As a result of the combination and thorough mechanical mixing of both components, rigid (hard) foam with a closed-cell structure is obtained. The system should be processed only with the use of high-pressure foaming units equipped with foamer heads. This product is a unique system designed for the production of high-quality thermal insulation, applied mainly outside buildings, both residential, commercial, as well as industrial or agricultural. In addition to the increased compressive foam strength, enabling long- and short-term structural load, the system is characterised by increased flammability parameters (flammability class: E) and physico-mechanical parameters that remain unchanged over time. Due to the appropriate thickness of the insulation layer, which additionally is jointless, the energy efficiency of the entire insulated surface is improved.
EKOPRODUR S0540 was introduced for sale on the basis of the Regulation on construction products CPR No. 305/2011 along with the assessment of performance carried out by the Building Research Institute in accordance with the European harmonized standard PN-EN 14315-1. The product has the PZH hygienic certificate, as well as CE marking confirmed by the Declaration of Performance issued for this product.
The EKOPRODUR S0540 system is used for the production of rigid (hard) foam, which at the same time is a spray thermal insulation applied directly to the surface of the roof, floor or foundations regardless of the building material from which they are made.
Main application advantages of the product:
Applicability directly onto the insulated surface made of most commercially available construction materials;
External thermal insulation with a wide application range (insulation of roofs, floors, foundations in residential, commercial, industrial and agricultural buildings, both modernized and newly erected);
Extremely durable and light insulation allows individual insulation thickness to be chosen without overloading the building structure;
Jointless insulation without thermal bridges or air gaps responsible for heat loss;
The ability to isolate hard-to-reach places with full insulation tightness guarantee;
Speed of execution and versatile technique of applying insulation give the possibility of making insulation in a single day – in case of a flat surface of up to 1000 m2 ;
Thermal insulation with high resistance to moisture and wind protects the insulated object against mould and fungi;
Mechanical properties of polyurethane foam made with the EKOPRODUR S0540 system:
Apparent density of core: ≥ 50 kg/m3
Classification of the reaction to fire performance: E
Resistance to external fire: BROOF(t1)
Short-term water absorption by partial immersion, WP ≤ 0,11 kg/m2
Coefficient of thermal conductivity:
λmean, i : 0,022 W/(m·K)
λ90, 90 : 0,023 W/(m·K)
Declared value, λD for thickness:
dN < 40 mm: 0,029 W/(m·K)
40 mm ≤ dN < 60 mm: 0,028 W/(m·K)
dN ≥ 60 mm: 0,027 W/(m·K)
High mechanical strength, compressive strength: ≥ 300 kPa
Coefficient of water vapor diffusion resistance: μ 165
70°C, 90% RH, over 48 h: l ≤ 4%, w ≤ 4%, t ≤ 1%
-30°C, over 48h: l ≤ 2%, w ≤ 2%, t ≤ 0,5%
Total relative deformation:
48 h, 20 kPa, 80°C: ≤ 0,95%
The content of closed cells ≥ 90%
In order for the sprayed foam to retain its parameters, before starting work, clean the insulated surface of dust and oils and secure the room and the immediate surroundings.
Formulated mixture of polyols and isocyanates, Two component polyurethane system, polyurethane, PU, PUR, rigid polyurethane foam, polyurethane closed cell foam, spray thermal insulation, rigid high density foam, polyurethane foam with excellent adhesion, stable performance insulation material, spray foam thermal insulation with improved flammability properties, seamless polyurethane insulation, seamless spray insulation, thermal insulation for building walls, thermal insulation for ceilings, seamless thermal insulation for building exterior walls, external thermal insulation for warehouses, thermal insulation for commercial buildings, polyurethane thermal insulation for floors and floors, polyurethane thermal insulation for foundations, durable insulation for securing pools and slides, waterproofing, thermal insulation with high resistance to moisture and wind, mold and mildew resistant thermal insulation, thermal insulation for flat roofs, thermal insulation for sloped roofs, thermal insulation for large-area roofs, rigid PU foam with flammability classification E, robust insulation for surface reinforcement.
Manufacturer: PCC Prodex Sp. z o.o.
PCC Prodex Sp. z o.o. is a long-term manufacturer of one and two-component polyurethane systems used, for example to produce rigid and semi-rigid insulation materials, insulating spray foams or various types of glue.
All the above information related to the product are provided according to the best knowledge of the manufacturer and published in good faith. However, the manufacturer does not guarantee the information and contents of this document are complete and accurate, and shall not be liable for the results of using them. The user is obliged to verify and confirm the information and contents of this documentation on his/her own. The manufacturer reserves the right to change the content of this document at any time without stating reasons of such changes.
Subscribe to receive information about new products on the Product Portal and commercial information about the PCC Capital Group
By continuing to use our website, you are agreeing to the placement of cookies or similar technologies on your device for functional, statistical and marketing purposes. You can modify or withdraw your consent at any time in your browser settings. Learn more