EKOPRODUR FC H003 is a two-component polyurethane system for the production of a rigid foam. It can be processed by means of high-pressure foaming machines. Recommended foam density in the product is 38-50 kg/m3.
EKOPRODUR FC H003 is a system with excellent flow properties designed for filling long elements: profiles, structural elements, pipes, etc. It can be processed using low- and high-pressure foaming machines. The density of the foam in the final product should be at least 38 kg/m3. In terms of processing, the product is quite versatile as it can be processed using both low- and high-pressure foaming machines. A characteristic feature of this system is the uniform density of the foam in the finished product, which should be at least 38 kg/m3. Materials produced based on EKOPRODUR FCH003 maintain good stability of parameters, even with continuous operation at temperatures up to -40°C and periodically up to 120 °C.
An important fact is that EKOPRODUR FCH003 does not contain foaming agents which significantly deplete the ozone layer. This is compliant with EU provisions on the marketing and use of controlled substances, according to Regulation (EC) no. 1005/2009 dated 16 September 2009. Moreover, the product has a Hygienic Certificate issued by the National Institute of Hygiene (PZH no. BK/B/0429/01/2019), which proves that the product used according to the manufacturer’s instructions has no negative impact on health and the environment.
Main application advantages of the product:
Excellent filling of long elements;
Low density of the product;
Short hardening time;
Possibility of production of insulating material with even density distribution thanks to good flow properties allowing for thorough filling of the mold of the given element;
Production of the material based on rigid polyurethane foam with a wide application range;
Foam performance properties:
Apparent density of the core: ≥ 38 kg/m3 (PN-EN 1602:2013-07)
Formulated mixture of polyols and isocyanates, Two-component polyurethane system, two-component insulation system, polyurethane, PU, PUR, PU rigid foam produced by In Situ method, polyurethane closed-cell foam, heat insulation of containers, cold insulation of containers, thermal insulation of tanks, thermal insulation of pipelines with lining, rigid insulation foam for pipelines, PU foam for insulation of building equipment, insulation of industrial installations, rigid foam with reduced flammability, insulation foam with increased fire resistance, spray thermal insulation, rigid polyurethane foam with improved density, rigid polyurethane foam with improved strength, rigid polyurethane foam with excellent adhesion, stable insulation material, spray thermal insulation with improved flammability properties, seamless polyurethane insulation, polyurethane foam casting, polyurethane system for mould casting, polyurethane system for filling, insulation with good thermal conductivity.
Manufacturer: PCC Prodex Sp. z o.o.
PCC Prodex Sp. z o.o. is a long-term manufacturer of one and two-component polyurethane systems used, for example to produce rigid and semi-rigid insulation materials, insulating spray foams or various types of glue.
All the above information related to the product are provided according to the best knowledge of the manufacturer and published in good faith. However, the manufacturer does not guarantee the information and contents of this document are complete and accurate, and shall not be liable for the results of using them. The user is obliged to verify and confirm the information and contents of this documentation on his/her own. The manufacturer reserves the right to change the content of this document at any time without stating reasons of such changes.
Subscribe to receive information about new products on the Product Portal and commercial information about the PCC Capital Group
By continuing to use our website, you are agreeing to the placement of cookies or similar technologies on your device for functional, statistical and marketing purposes. You can modify or withdraw your consent at any time in your browser settings. Learn more