EKOPROFLEX 30-140 is a two-component polyurethane system (PU or PUR), intended for the production of integral and moulded foam. The system is distinguished by its increased density and mechanical strength. It is designed for the production of elements with densities ranging from 350 to even 500 kg / m3. The production of elements takes place in heated moulds.
The system consists of two components. The first of these, component A, is EKOPROFLEX 30-140. It is a polyol mixture, in the form of an oily white liquid. The component B is the EKOPROMER I24. It is a mixture of aromatic polyisocyanates (mainly diphenylmethane diisocyanate), occurring as a honey-brown liquid. Both components do not contain suspensions. The components are characterized by quite high viscosity at room temperature.
An important fact for processors is that the EKOPROFLEX 30-140 system can be processed using low and high pressure foaming machines. The full mechanical properties are obtained after 24 hour foam aging process.
The EKOPROFLEX 30-140 system does not contain foaming agents that significantly deplete the ozone layer. This is in accordance with the European Union regulations on the circulation and use of controlled substances in accordance with Regulation (EC) No. 1005/2009 of 16 September 2009. In addition, the product has a Hygienic Certificate of the National Institute of Hygiene (PZH), which guarantees that the product, when used in accordance with the manufacturer’s instructions, does not adversely affect human and animal health and the natural environment.
Main application advantages of the product:
efficient production of integral foam in moulds
processing using both low- and high-pressure machines,
production of elements based on integral foam with increased mechanical parameters,
production of elements based on integral foam with increased densities, i.e. from 350 to 500 kg / m3,
production of elements from a material with a wide application range adapted to the specific requirements of the manufacturer,
due to the lack of foaming agents that deplete the ozone layer, the manufactured elements are made of a material that does not adversely affect health and the natural environment.
All the above information related to the product are provided according to the best knowledge of the manufacturer and published in good faith. However, the manufacturer does not guarantee the information and contents of this document are complete and accurate, and shall not be liable for the results of using them. The user is obliged to verify and confirm the information and contents of this documentation on his/her own. The manufacturer reserves the right to change the content of this document at any time without stating reasons of such changes.
Subscribe to receive information about new products on the Product Portal and commercial information about the PCC Capital Group
By continuing to use our website, you are agreeing to the placement of cookies or similar technologies on your device for functional, statistical and marketing purposes. You can modify or withdraw your consent at any time in your browser settings. Learn more