PCC
RegisterLogin Page

Safe Product

The safety of people and the environment is a key aspect of the design and production of chemicals. Producing various chemicals, we subject them to many certified tests, while the finished products manufactured in the installations owned by the PCC Group are subjected to numerous tests and examinations in terms of possible in-use hazards. Products marked with the “Safe Product” pictogram, if used in compliance with intended use and manufacturer’s recommendations, are completely safe for users and the environment. This is confirmed, i. a., by the hygienic certificate of the National Institute of Hygiene, ISO standards, positive opinions of the FDA, ECOCERT, ECOLABEL and many other bodies.

of 33
BioROKAMINA K30B (Coco-betaine) BIO ROKAmina K30B is a very high purity, colourless amphoteric surfactant, with a content of about 30% of the active substance, belonging to the betaine group. This...
Composition
Betaines
CAS No.
66455-29-6
BioROKAMINA K30B  (Coco-betaine)
BioROKAMINA K30B MB (Coco-betaine) BioROKAMINA K30B MB is a highest quality, colourless amphoteric surfactant with approx. 30% content of active substance, classified among betaines. This specific...
Composition
Betaines
CAS No.
66455-29-6
BioROKAMINA K30B MB  (Coco-betaine)
BioROKAMINA K40HC (Cocamidopropyl Betaine) BioROKAmina K40HC is an ecological amphoteric surfactant of a very high purity, from the betaine group. It is available as a light yellow water solution, in which...
Composition
Betaines
CAS No.
97862-59-4
BioROKAMINA K40HC  (Cocamidopropyl Betaine)
BioROKAMINA K40HC MB (Cocamidopropyl Betaine) BioROKAMINA K40HC MB is an ecological amphoteric surfactant of a very high purity, from the betaine group. It is available as a light yellow water solution, in which...
Composition
Betaines
CAS No.
97862-59-4
BioROKAMINA K40HC MB  (Cocamidopropyl Betaine)
Crossin® 450 Open Cell Spray Foam - Spray polyurethane foam Ready to use The Crossin 450 Open Cell Spray Foam is the polyol part of a polyurethane system, intended for use with pMDI. It is used to obtain open cell semi-rigid polyurethane...
Composition
Mixtures
Crossin® 450 Open Cell Spray Foam - Spray polyurethane foam
Crossin® Hard 36 Ready to use The Crossin® Hard 36 system is used for the production of rigid (hard) foam, which is also a spray thermal insulation applied directly to the insulated roof surface,...
Composition
Mixtures
Crossin<sup>®</sup> Hard 36
Crossin® Hard 40 - Spray thermal insulation Ready to use The Crossin® Hard 40 system is used for the production of rigid (hard) foam, which at the same time is a spray thermal insulation applied directly to the insulated...
Composition
Mixtures
Crossin<sup>®</sup> Hard 40 - Spray thermal insulation
Crossin® Hard 50 Ready to use The Crossin® Hard 50 system is used for the production of rigid (hard) foam, which at the same time is a spray thermal insulation applied directly to the insulated...
Composition
Mixtures
Crossin® Hard 50
Crossin® Attic Soft - Spray thermal insulation Ready to use The Crossin® Attic Soft system is used for the production of semi-rigid foam, which at the same time is a sprayed thermal and acoustic insulation applied directly...
Composition
Mixtures
Crossin® Attic Soft - Spray thermal insulation
Ekoprodur® 1331B2 Polyurethane system Ready to use EKOPRODUR 1331B2 is a two-component polyurethane adhesive (PUR) consisting of a polyol mixture (component A) and an isocyanate part (component B). Each component...
Composition
Mixtures
Ekoprodur® 1331B2 Polyurethane system
Ekoprodur®S0310/E Polyurethane system Ready to use EKOPRODUR S0310 / E is a polyurethane system consisting of a polyol part (component A) and an isocyanate part (component B). Each of the ingredients is a liquid...
Composition
Mixtures
Ekoprodur®S0310/E Polyurethane system
Ekoprodur®S0330 System poliuretanowy Ready to use EKOPRODUR S0330 is a polyurethane system consisting of: polyol part (component POLY) and isocyanate part (component IZO). Each of the ingredients is a liquid and...
Composition
Mixtures
Ekoprodur®S0330 System poliuretanowy
Ekoprodur®S0331FL System poliuretanowy Ready to use EKOPRODUR S0331FL is a polyurethane system which consists of a polyol (POLY component) and an isocyanate (ISO component). Each of the components is a liquid and...
Composition
Mixtures
Ekoprodur®S0331FL System poliuretanowy
Ekoprodur®S0541 Polyurethane system Ready to use EKOPRODUR S0541 is a polyurethane system consisting of: polyol part (component A) and isocyanate part (component B). Each of the ingredients is a liquid and has...
Composition
Mixtures
Ekoprodur®S0541 Polyurethane system
Ekoprodur®S10-HP Polyurethane system Ready to use EKOPRODUR S10-HP is a polyurethane system consisting of: polyol part (component A) and isocyanate part (component B). Each of the ingredients is a liquid and has...
Composition
Mixtures
Ekoprodur®S10-HP Polyurethane system
Ekoprodur® S11E-MAX Polyurethane system Ready to use EKOPRODUR S11E-MAX is a high performance polyurethane system consisting of a polyol part (component A) and an isocyanate part (component B). Each of the ingredients...
Composition
Mixtures
Ekoprodur® S11E-MAX Polyurethane system
EXOwet D15 EXOwet D15 is an adjuvant that supports plant protection products. Due to its surface-active properties, the product effectively reduces the surface tension of the...
Composition
Mixtures
EXOwet D15
Silicon metal (PCC BakkiSilicon) Silicon metal is used, among other things, as an aluminium alloyant; it is also employed in the chemicals industry for the manufacture of siloxanes and silicones....
Composition
Silicon
CAS No.
7440-21-3
Silicon metal (PCC BakkiSilicon)
1 - 18 of 592 products