EKOPRODUR 05200 is a polyurethane system consisting of: polyol part (component A) and isocyanate part (component B). Each of the ingredients is a liquid and has different parameters. Component A with a higher viscosity is dark, while component B with higher density is brown. As a result of the thorough mechanical mixing of both components, a rigid foam is obtained in the form of a low-foamed polyurethane coating. Due to its high reactivity (quick reaction times), the system should be processed only with the use of specialized high-pressure foaming units equipped with foaming heads.
This product is a unique system designed for the production of high quality coatings, applied mainly on surfaces requiring mechanical reinforcement, for example for strengthening shower trays, bathtubs, car body elements, etc. EKOPRODUR 05200 system shows excellent adhesion to most materials used for extruding shower trays and bath tubs, e.g. acrylonitrile-butadiene-styrene (ABS) copolymer or acrylic.
The foamed system is distinguished by its increased compressive strength, enabling long- and short-term structural load. Sprayed on the given surface, the coating is resistant to moisture and has no joints that could weaken the reinforcement layer. In addition, the system is available in a wide range of densities depending on the customer’s requirements, which ensures extensive application possibilities. The EKOPRODUR 05200 system is used for the production of a low-foamed rigid coating, which is also a hydro and thermal insulation.
EKOPRODUR 05200 has a Hygienic Certificate of the National Institute of Hygiene (PZH) confirming that the product, when used in accordance with the manufacturer’s instructions, does not adversely affect health and the environment. In addition, the system is distinguished by a reduced emission of volatile organic compounds (VOC), as it does not contain foaming agents that significantly deplete the ozone layer – in accordance with European Union regulations, Regulation (EC) No. 1005/2009 of 16.IX.2009.
Main application advantages of the product:
Can be applied directly to a protected (reinforced) surface made of most materials used for extruding shower trays and bathtubs;
Polyurethane coating with a wide application range;
Extremely durable coating adapted to the requirements and structural loads;
The possibility of obtaining a jointless and durable coating;
A short period of time to create a protective layer;
Polyurethane protective coating with good resistance to moisture and water, additionally protects the object against mechanical damage, mould and fungi;
Mechanical properties of polyurethane foam made with the EKOPRODUR 05200 system:
Apparent density of core: 150 – 400 kg/m3
Classification of the reaction to fire performance: F
The content of closed cells ≥ 90%
In order for the sprayed coating to retain its parameters, before starting work it is necessary to prepare and clean the surface of dust and oils and secure the immediate surroundings. When spraying materials sensitive to temperature increase, a few thin layers should be made until the required coating thickness is obtained.
All the above information related to the product are provided according to the best knowledge of the manufacturer and published in good faith. However, the manufacturer does not guarantee the information and contents of this document are complete and accurate, and shall not be liable for the results of using them. The user is obliged to verify and confirm the information and contents of this documentation on his/her own. The manufacturer reserves the right to change the content of this document at any time without stating reasons of such changes.
Subscribe to receive information about new products on the Product Portal and commercial information about the PCC Capital Group
By continuing to use our website, you are agreeing to the placement of cookies or similar technologies on your device for functional, statistical and marketing purposes. You can modify or withdraw your consent at any time in your browser settings. Learn more