Rokester® DP 1970.01 is a polymer from the group of aromatic polyester polyols. It exists in the form of a viscous liquid. It has a hydroxyl value within the range of 180-200 mg KOH/g and dynamic viscosity within the range of 3000-8000 mPas at temp. 25°C.
Rokester® DP 1970.01 is a raw material dedicated mainly to the production of PIR foam.
Rokester® DP 1970.01 is an aromatic polyester polyol produced from recycled PET (polyethylene terephthalate) with a minimum content of 28% in the product (EN ISO 14021:2016).
PET (polyethylene terephthalate) is a plastic characterized by high stiffness and hardness, as well as high mechanical and thermal strength. It is easy to process and maintains high dimensional stability.
It has low water absorption and is resistant to corrosion and weathering.
As a raw material for the production of polyester polyols, recycled PET must be remelted. Recycled PET pellets are heated and, with the aid of appropriate catalysts and additives, converted into liquid polyester polyol (in this case, Rokester DP® 1970.01), which can be used to produce new polyurethanes.
Rokester® DP 1970.01 is a fully-fledged product that can be used on par with conventionally produced products. It is characterized by low viscosity.
The product is primarily intended for the production of PIR foam. Thanks to its aromatic groups, it enables PIR foams to achieve better flame-retardant properties.
Properties and applications
Product characteristics:
polyol based on recycled PET raw material, with a minimum content of 28% in the product (EN ISO 14021:2016),
low-viscosity product,
increases the flame retardancy of foam,
the product does not contain nonylphenol derivatives,
the product is not classified under the CLP/GHS Regulation,
PCC Rokita SA is one of the largest chemical companies in Poland as well as Central and Eastern Europe. Its activity includes the production of chloroalkali, polyether polyols, polyalkylene glycols and phosphorus derivatives.
All the above information related to the product are provided according to the best knowledge of the manufacturer and published in good faith. However, the manufacturer does not guarantee the information and contents of this document are complete and accurate, and shall not be liable for the results of using them. The user is obliged to verify and confirm the information and contents of this documentation on his/her own. The manufacturer reserves the right to change the content of this document at any time without stating reasons of such changes.