RRokopol® iFlex N30 is a polyether polyol. It is a homogeneous, clear liquid. It contains antioxidants (BHT-free). It has a hydroxyl number in the range of 46–50 mg KOH/g and a dynamic viscosity at 25°C in the range of 750–1050 mPas.
The product was developed as part of a research and development project co-financed by the European Union through the European Regional Development Fund.
Rokopol® iFlex N30 is used in the production of flexible polyurethane foams with a wide range of densities and high resistance to “scorch.”
When used with appropriately selected additives (catalysts, silicones, blowing agents), it is used to produce flexible foam blocks with a rectangular cross-section and a height of up to 120 cm.
Key application advantages of Rokopol® iFlex N30 polyol:
Rokopol iFlex N30 is an alkoxylated castor oil containing 30% castor oil,
can be used at 100% in the formulation,
the mechanical properties of foam produced with Rokopol iFlex N30 polyol are comparable to those of foam produced with conventional polyol
It is possible to produce foams with densities ranging from 23 to 60 kg/m³ and hardness values ranging from 1.0 to 5.0 kPa;
the foam’s tear strength exceeds 70 kPa, and its relative elongation at break exceeds 100%.
The most common applications of Rokopol® iFlex N30 polyol:
standard, soft, and super-soft flexible foams,
mattresses and pillows with enhanced comfort (furniture industry).
Properties and applications
Properties:
Alkoxylated castor oil containing 30% castor oil.
It can be used in formulations of up to 100%.
It enables the production of foams with mechanical properties comparable to those of foams based on conventional polyols.
It allows for the production of foams with a density of 23–60 kg/m³ and a hardness of 1.0–5.0 kPa.
It provides a tear strength of >70 kPa and an elongation at break of >100%.
It enables the production of foams with high resistance to scorch.
Applications:
standard, soft, and super-soft flexible foams,
mattresses and pillows with enhanced comfort (furniture industry).
PCC Rokita SA is one of the largest chemical companies in Poland as well as Central and Eastern Europe. Its activity includes the production of chloroalkali, polyether polyols, polyalkylene glycols and phosphorus derivatives.
All the above information related to the product are provided according to the best knowledge of the manufacturer and published in good faith. However, the manufacturer does not guarantee the information and contents of this document are complete and accurate, and shall not be liable for the results of using them. The user is obliged to verify and confirm the information and contents of this documentation on his/her own. The manufacturer reserves the right to change the content of this document at any time without stating reasons of such changes.