PCC
RegisterLogin Page

Adhesives

Adhesives are substances used to connect together two objects or surfaces by adhesion mechanisms, such as chemical bonding, or intermolecular interactions.

Filters
Function
Composition
Segment
Manufacturer
of 5
Rokopol® MOS 460 Ready to use Rokopol® MOS 460 is a plasticiser, a hydrophobic polyol with very low reactivity, BO. It exists in the form of homogeneous, colourless to yellow liquid. It contains...
Composition
PAG , Polyether polyols, Water insoluble
Rokopol® MOS 460
Rokopol® MOS 68 Ready to use Rokopol® MOS 68 is a plasticiser, a hydrophobic polyol with low reactivity, BO. It exists in the form of homogeneous, colourless to yellow liquid. It contains antioxidants...
Composition
PAG , Polyether polyols, Water insoluble
Rokopol® MOS 68
Rokopol® MOS 680 Ready to use Rokopol® MOS 680 is a plasticiser, a hydrophobic polyol with very low reactivity, BO. It exists in the form of homogeneous, colourless to yellow liquid. It contains...
Composition
PAG , Polyether polyols, Water insoluble
Rokopol® MOS 680
Rokopol® P-B-150 Ready to use Rokopol® P-B-150 is a reactive plasticiser, a hydrophobic polyol, PO. It exists in the form of homogeneous, colourless to yellow liquid. It contains antioxidants...
Composition
Butanol, PAG , Polyether polyols, Partially water soluble PAG, Monols
CAS No.
9003-13-8
Rokopol® P-B-150
Rokopol® P-B-220 Ready to use Rokopol® P-B-220 is a reactive plasticiser, a hydrophobic polyol, PO. It exists in the form of homogeneous, colourless to yellow liquid. It contains antioxidants...
Composition
Butanol, PAG , Polyether polyols, Partially water soluble PAG, Monols
CAS No.
9003-13-8
Rokopol® P-B-220
Rokopol® P-B-32 Ready to use Rokopol® P-B-32 is a reactive plasticiser, a hydrophobic polyol, PO. It exists in the form of homogeneous, colourless to yellow liquid. It contains antioxidants...
Composition
Polyether polyols, PAG , Butanol, Partially water soluble PAG, Monols
CAS No.
9003-13-8
Rokopol® P-B-32
Rokopol® P-B-320 Ready to use Rokopol® P-B-320 is a reactive plasticiser, a hydrophobic polyol, PO. It exists in the form of homogeneous, colourless to yellow liquid. It contains antioxidants...
Composition
Butanol, PAG , Polyether polyols, Partially water soluble PAG, Monols
CAS No.
9003-13-8
Rokopol® P-B-320
Rokopol®P-B-46 Ready to use Rokopol® P-B-46 is a reactive plasticiser, a hydrophobic polyol, PO. It exists in the form of homogeneous, colourless to yellow liquid. It contains antioxidants...
Composition
Butanol, PAG , Polyether polyols, Partially water soluble PAG, Monols
CAS No.
9003-13-8
Rokopol®P-B-46
Rokopol® P-B-68 Ready to use Rokopol® P-B-68 is a reactive plasticiser, a hydrophobic polyol, PO. It exists in the form of homogeneous, colourless to yellow liquid. It contains antioxidants...
Composition
Butanol, PAG , Polyether polyols, Partially water soluble PAG, Monols
CAS No.
9003-13-8
Rokopol® P-B-68
Rokopol® DE320 (Propylene glycol) Rokopol® D320 is a specialized reactive diol used for production of 1C and 2C adhesives, sealants and elastomers, as well as other polyurethane materials in reaction...
Composition
Alkoxylated alcohols, Polyether polyols, Diols
CAS No.
53637-25-5
Rokopol® DE320   (Propylene glycol)
Rokopol® DE4020 (Propylene glycol) Rokopol® D4020 is a specialized reactive diol used for production of 1C and 2C adhesives, sealants and elastomers, as well as other polyurethane materials in reaction...
Composition
Alkoxylated alcohols, Polyether polyols, Diols
CAS No.
53637-25-5
Rokopol® DE4020   (Propylene glycol)
Rokopol® G500 (Polyether polyol) Rokopol® G500 is glycerine-based polyether polyol (polyoxyalkylene triol) which exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding...
Composition
Polyether polyols, Alkoxylated alcohols, Triols
CAS No.
25791-96-2
Rokopol® G500  (Polyether polyol)
Rokopol® G700 (Polyether polyol) Rokopol®G700 is glycerine-based polyether polyol (polyoxyalkylene triol) which exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding...
Composition
Alkoxylated alcohols, Polyether polyols, Triols
CAS No.
25791-96-2
Rokopol® G700  (Polyether polyol)
Rokrysol JW20 Rokrysol JW20 is an effective, synthetic sizing used in the textile industry. It is produced in the form of a viscous, homogeneous, clear liquid, from yellow to...
Composition
Copolymers
Rokrysol JW20
Si-PolyU 2550 (SMP – Silane Modified Polymers) Si-PolyU 2550 is a moderately viscous, low-polar, silane-modified polymer developed for the formulation of solvent- and isocyanate-free sealants and elastic adhesives....
Composition
Silicone hybrid polymers
Si-PolyU 2550  (SMP – Silane Modified Polymers)
Si-PolyU 4020 (SMP – Silane Modified Polymers) Si-PolyU 4020 is a moderately viscous, low-polar, silane-modified polymer that was developed for the formulation of solvent- and isocyanate-free elastic adhesives...
Composition
Silicone hybrid polymers
Si-PolyU 4020  (SMP – Silane Modified Polymers)
Si-PolyU 5013 (SMP – Silane Modified Polymers) Si-PolyU 5013 is a moderately viscous, low-polar, silane-modified polymer developed for the formulation of solvent-free and isocyanate-free adhesives. The polymer...
Composition
Silicone hybrid polymers
Si-PolyU 5013 (SMP – Silane Modified Polymers)
Sil-Pur 80 Ready to use SIL-PUR 80 is a highly specialized two-component organic-mineral adhesive, which is designed for use in underground mines with and without methane presence. It may...
Composition
Mixtures
Sil-Pur 80
SyncoPol® DL1001 SyncoPol® DL1001 is a medium molecular weight polyether diol used in a wide variety of polyurethane applications ranging from elastomers, coatings and adhesives...
Composition
Polyether polyols, Diols
CAS No.
25322-69-4
SyncoPol® DL1001
SyncoPol® EB2500 SyncoPol® EB2500 is branched polyester polyol with hydroxyl value in range 43 – 48 mgKOH/g and molecular weight ~2500 g/mol. The product has viscosity in range 850...
Composition
Polyester polyols
SyncoPol® EB2500
61 - 80 of 81 products
Items on page: 20

Adhesives are substances used to connect together two objects or surfaces by adhesion mechanisms, such as chemical bonding, or intermolecular interactions.

Adhesives may be divided according to the number of their components used for forming and curing the adhesive layer:

  • one-component adhesives – they get hardened through chemical reaction induced by an external agent e.g. heat, moisture or UV radiation.
  • multi-component adhesives – they get hardened by mixing two or more components that react together and form the joint. The adhesive components separately do not have adhesive properties.

The mechanical strength of the glued surfaces is influenced by several factors, including:

  • size and shape of surfaces glued – the joint formed over a large area with an irregular shape is more durable and stronger than that created through joining small, smooth materials,
  • the depth of adhesive penetration into the substrate – the rougher the surface, the more durable the joint.
  • impact of the adhesive on surfaces glued – the joint formed by chemical bonding between the components of the adhesive and the material of the area glued, it is more resistant than that created through chemical interaction between the components.

Many types of synthetic adhesives are available on the market, including epoxy, phthalic, polyurethane, poly-acrylic or silicone adhesives, which are used e.g. to join metal, ceramics, paper, wood, plastics or leather.