Chemical name:

Formulated mixture of polyols and isocyanates

Segment:

consumer products and packaging, polyurethanes, poliurethane systems

Markets and applications:

building & construction, thermal & acoustic spray systems

Function:

insulation, rigid foams, spray foams

Composition:

mixtures

Manufacturer:

PCC Prodex Sp. z o.o.

CAS No.:

-

Description

EKOPRODUR S0329 is a polyurethane system consisting of: polyol part (component A) and isocyanate part (component B). Each of the ingredients is a liquid and has different parameters. Component A with a higher viscosity is dark, while component B with higher density is brown. In addition, the system is distinguished by a reduced emission of volatile organic compounds (VOC), as it does not contain foaming agents that significantly deplete the ozone layer - in accordance to European Union regulations, Regulation (EC) No. 1005/2009 of 16.IX.2009.

As a result of the combination and thorough mechanical mixing of both components, rigid (hard) foam with a closed-cell structure is obtained. The system should only be processed using high-pressure foaming units equipped with a foaming head. This product is a unique system designed for the production of high quality thermal insulation, applied both inside and outside residential, commercial and industrial and agricultural buildings. The foamed system is characterised by increased flammability parameters (flammability class E) and physico-mechanical parameters that remain unchanged over time. The appropriate thickness of the insulation layer (maximum insulation thickness is 35 mm), which additionally is jointless, improves the energy efficiency of the entire insulated surface. In order to obtain the best insulation parameters, it is recommended that all insulation layers are made in one day. If the foam is exposed to direct UV radiation (sunlight), it should be properly protected.

EKOPRODUR S0329 was introduced for sale on the basis of the Regulation on construction products CPR No. 305/2011 together with the assessment of performance carried out by the Building Research Institute in accordance with the European harmonized standard PN-EN 14315-1. The product has a PZH hygienic certificate as well as CE marking confirmed by the Declaration of Performance issued for this product.

The EKOPRODUR S0329 system is used for the production of rigid (hard) foam, which is also a spray thermal insulation applied directly to the surface of the walls (inside and outside) and ceilings regardless of the building material from which it is made.

Main application advantages of the product:

  • Can be used directly on the surface made of the most commercially available construction materials;
  • External and internal thermal insulation with a wide application range (insulation of walls and ceilings in residential, commercial, industrial and agricultural buildings, both modernized and newly erected);
  • Lightweight insulation that ensures adjusting its thickness without overloading the building's structure;
  •  Jointless insulation without thermal bridges or air gaps responsible for heat loss;
  • The ability to isolate hard-to-reach places with full insulation tightness guarantee;
  • The speed of execution and versatile technique of applying insulation give the possibility of installing the entire insulation even in one day;
  • Thermal insulation with high resistance to moisture and wind protects the insulated object against mould and fungi;

Mechanical properties of polyurethane foam made with the EKOPRODUR S0329 system:

  • Apparent density of core: ≥ 36 kg/m3
  • Classification of the reaction to fire performance: E
  • Short-term water absorption by partial immersion, WP ≤ 0,11 kg/m2
  • Coefficient of thermal conductivity:
    • λmean, I : 0,021 W/(m·K)
    • λ90,90: 0,022 W/(m·K)
  • Declared value, λD for thickness:
    • dN < 40 mm: 0,027 W/(m·K)
    • 40 mm ≤ dN < 60 mm: 0,025 W/(m·K)
    • dN ≥ 60 mm: 0,024 W/(m·K)
  • High mechanical strength, compressive strength: σ10 ≥ 270 kPa
  • Coefficient of water vapor diffusion resistance: μ 35 – μ 50
  • Temperature stability:
    • 70°C, 90% RH, over 48 h: l ≤ 4%, w ≤ 4%, t ≤ 1%
    • -30°C, over 48 h: l ≤ 2%, w ≤ 2%, t ≤ 0,5%
  • The total relative deformation:
    • 48 h, 20 kPa, 80°C: ≤ 2,57%
  • Adhesion of the foam, perpendicular to the ground: ≥ 300 kPa
  • The content of closed cells: ≥ 90%
  • Operating temperature:  -30÷100°C

In order for the foam to keep its parameters,  before starting work it is necessary to clean the insulated surface of dust, oil, loose fragments and other agents that may reduce the adhesion of foam. After spraying, allow a 24-hour seasoning period. In addition, it is important to protect the room and the immediate surroundings, mainly windows, doors and furniture against accidental soiling.

Read more
Collapse

Properties and applications:

 

  • production of high quality rigid foam with intermediate density;
  • production of polyurethane foam (PUR) with closed-cell structure and the fire class E;
  • production of effective thermal insulation using modern and practical spraying technology;
  • production of insulating material with stable parameters and excellent adhesion to various building surfaces;
  • strong insulation of walls and ceilings in buildings without excess thickness;
  • durable insulation for surface reinforcement;




 

Alternative names:

Show alternative names
polyurethane; polyurethane system; PU; PUR (Hide)

Tags:

spraying spray foam system thermal insulation waterproofing polyurethane systems ekoprodur rigid closed-cell foam
Individual inquiries:
Individual inquiries: Reveal e-mail
Reveal phone number
Certificate of Health QualityPassive constructionEnergy efficiencyLightweight polyurethane insulationThermal insulation


* Required fields
Copy of message will be sent to your e-mail address.


To contact us via this form, please provide the data indicated in it. Providing data is voluntary, but if you do not, it will not be possible to send us a message through this form.

The personal data administrator is PCC Rokita SA with its registered office in Brzeg Dolny (Sienkiewicza Street 4, 56-120 Brzeg Dolny). You can contact our Data Protection Supervisor by e-mail: .